#!/usr/bin/with-contenv bash
# Wazuh App Copyright (C) 2017, Wazuh Inc. (License GPLv2)

# Variables
source /permanent_data.env

WAZUH_INSTALL_PATH=/var/ossec
WAZUH_CONFIG_MOUNT=/wazuh-config-mount

##############################################################################
# Aux functions
##############################################################################
print() {
  echo -e $1
}

error_and_exit() {
  echo "Error executing command: '$1'."
  echo 'Exiting.'
  exit 1
}

exec_cmd() {
  eval $1 > /dev/null 2>&1 || error_and_exit "$1"
}

exec_cmd_stdout() {
  eval $1 2>&1 || error_and_exit "$1"
}


##############################################################################
# This function will attempt to mount every directory in PERMANENT_DATA
# into the respective path.
# If the path is empty means permanent data volume is also empty, so a backup
# will be copied into it. Otherwise it will not be copied because there is
# already data inside the volume for the specified path.
##############################################################################

mount_permanent_data() {
  for permanent_dir in "${PERMANENT_DATA[@]}"; do
    data_tmp="${WAZUH_INSTALL_PATH}/data_tmp/permanent${permanent_dir}/"
    print ${data_tmp}
    # Check if the path is not empty
    if find ${permanent_dir} -mindepth 1 | read; then
      print "The path ${permanent_dir} is already mounted"
    else
        print "Installing ${permanent_dir}"
        exec_cmd "cp -ar ${data_tmp}. ${permanent_dir}"
    fi
  done
}

##############################################################################
# This function will replace from the permanent data volume every file
# contained in PERMANENT_DATA_EXCP
# Some files as 'internal_options.conf' are saved as permanent data, but
# they must be updated to work properly if wazuh version is changed.
##############################################################################

apply_exclusion_data() {
  for exclusion_file in "${PERMANENT_DATA_EXCP[@]}"; do
    if [  -e ${WAZUH_INSTALL_PATH}/data_tmp/exclusion/${exclusion_file}  ]
    then
      DIR=$(dirname "${exclusion_file}")
      if [ ! -e ${DIR}  ]
      then
        mkdir -p ${DIR}
      fi

      safe_cp() {
          if cp -p "$1" "$2" 2>/dev/null; then
              return 0
          else
              echo "Warning: Could not copy $1 (may be read-only)"
              return 0
          fi
      }

      print "Updating ${exclusion_file}"
      exec_cmd "safe_cp ${WAZUH_INSTALL_PATH}/data_tmp/exclusion/${exclusion_file} ${exclusion_file}"
    fi
  done
}

##############################################################################
# This function will rename in the permanent data volume every file
# contained in PERMANENT_DATA_MOVE
##############################################################################

move_data_files() {
  for mov_file in "${PERMANENT_DATA_MOVE[@]}"; do
    file_split=( $mov_file )
    if [ -e ${file_split[0]} ]
    then
      print "moving ${mov_file}"
      exec_cmd "mv -f ${mov_file}"
    fi
  done
}


##############################################################################
# This function will delete from the permanent data volume every file
# contained in PERMANENT_DATA_DEL
##############################################################################

remove_data_files() {
  for del_file in "${PERMANENT_DATA_DEL[@]}"; do
    if [ -e ${del_file} ]
    then
      print "Removing ${del_file}"
      exec_cmd "rm -f ${del_file}"
    fi
  done
}

##############################################################################
# Create certificates: Manager
##############################################################################

create_ossec_key_cert() {
  print "Creating wazuh-authd key and cert"
  exec_cmd "openssl genrsa -out ${WAZUH_INSTALL_PATH}/etc/sslmanager.key 4096"
  exec_cmd "openssl req -new -x509 -key ${WAZUH_INSTALL_PATH}/etc/sslmanager.key -out ${WAZUH_INSTALL_PATH}/etc/sslmanager.cert -days 3650 -subj /CN=${HOSTNAME}/"
}

##############################################################################
# Copy all files from $WAZUH_CONFIG_MOUNT to $WAZUH_INSTALL_PATH and respect
# destination files permissions
#
# For example, to mount the file /var/ossec/data/etc/ossec.conf, mount it at
# $WAZUH_CONFIG_MOUNT/etc/ossec.conf in your container and this code will
# replace the ossec.conf file in /var/ossec/data/etc with yours.
##############################################################################

mount_files() {
  if [ -e "$WAZUH_CONFIG_MOUNT" ]
  then
    print "Identified Wazuh configuration files to mount..."
    exec_cmd_stdout "cp --verbose -r $WAZUH_CONFIG_MOUNT/* $WAZUH_INSTALL_PATH"
  else
    print "No Wazuh configuration files to mount..."
  fi
}


##############################################################################
# Allow users to set the container hostname as <node_name> dynamically on
# container start.
#
# To use this:
# 1. Create your own ossec.conf file
# 2. In your ossec.conf file, set to_be_replaced_by_hostname as your node_name
# 3. Mount your custom ossec.conf file at $WAZUH_CONFIG_MOUNT/etc/ossec.conf
##############################################################################

set_custom_hostname() {
  sed -i 's/<node_name>to_be_replaced_by_hostname<\/node_name>/<node_name>'"${HOSTNAME}"'<\/node_name>/g' ${WAZUH_INSTALL_PATH}/etc/ossec.conf
}

function_configure_ossec_conf() {
OSSEC_CONF="${WAZUH_INSTALL_PATH}/etc/ossec.conf"

# --------------------------
# Defaults based on OSSEC_CONF
# --------------------------
if [[ -z "$WAZUH_CLUSTER_KEY" ]]; then
    WAZUH_CLUSTER_KEY=$(sed -n '/<cluster>/,/<\/cluster>/s/.*<key>\(.*\)<\/key>.*/\1/p' "$OSSEC_CONF" | head -n1)
fi

# Node type logic
if [[ "$WAZUH_NODE_TYPE" != "worker" ]]; then
    WAZUH_NODE_TYPE="master"
fi

# Default node name → HOSTNAME if not defined
WAZUH_NODE_NAME="${WAZUH_NODE_NAME:-$HOSTNAME}"

# --------------------------
# Replace Indexer Hosts
# --------------------------
if [[ -n "$WAZUH_INDEXER_HOSTS" ]]; then
    TMP_HOSTS=$(mktemp)
    {
        echo "    <hosts>"
        IFS=',' read -ra NODES <<< "$WAZUH_INDEXER_HOSTS"
        for NODE in "${NODES[@]}"; do
            IP="${NODE%:*}"
            PORT="${NODE#*:}"
            echo "      <host>https://$IP:$PORT</host>"
        done
        echo "    </hosts>"
    } > "$TMP_HOSTS";
    sed -i -e '/<indexer>/,/<\/indexer>/{ /<hosts>/,/<\/hosts>/{ /<hosts>/r '"$TMP_HOSTS" \
            -e 'd }}' "$OSSEC_CONF";
    rm -f "$TMP_HOSTS";

fi

# --------------------------
# Cluster: node_name
# --------------------------
sed -i "/<cluster>/,/<\/cluster>/ s|<node_name>.*</node_name>|<node_name>$WAZUH_NODE_NAME</node_name>|" "$OSSEC_CONF"

# --------------------------
# Cluster: node_type
# --------------------------
sed -i "/<cluster>/,/<\/cluster>/ s|<node_type>.*</node_type>|<node_type>$WAZUH_NODE_TYPE</node_type>|" "$OSSEC_CONF"

# --------------------------
# Cluster: key
# --------------------------
sed -i "/<cluster>/,/<\/cluster>/ s|<key>.*</key>|<key>$WAZUH_CLUSTER_KEY</key>|" "$OSSEC_CONF"

# --------------------------
# Cluster: bind_addr
# --------------------------
sed -i "/<cluster>/,/<\/cluster>/ s|<bind_addr>.*</bind_addr>|<bind_addr>$WAZUH_CLUSTER_BIND_ADDR</bind_addr>|" "$OSSEC_CONF"

# --------------------------
# Cluster: nodes list
# --------------------------
if [[ -n "$WAZUH_CLUSTER_NODES" ]]; then
    TMP_NODES=$(mktemp)
    {
        echo "    <nodes>"
        for N in $WAZUH_CLUSTER_NODES; do
            echo "        <node>$N</node>"
        done
        echo "    </nodes>"
    } > "$TMP_NODES";
    sed -i -e '/<cluster>/,/<\/cluster>/{ /<nodes>/,/<\/nodes>/{ /<nodes>/r '"$TMP_NODES" \
            -e 'd }}' "$OSSEC_CONF";
    rm -f "$TMP_NODES";
fi

echo "Wazuh manager config modified successfully."
}

##############################################################################
# Set correct ownership for Wazuh related directories
# on container start.
##############################################################################

configure_permissions() {
  chown -R wazuh:wazuh /var/ossec/queue/rids
  chown -R wazuh:wazuh /var/ossec/etc/lists
}

##############################################################################
# Change any ossec user/group to wazuh user/group
##############################################################################

set_correct_permOwner() {
  find / -group 997 -exec chown :999 {} +;
  find / -group 101 -exec chown :999 {} +;
  find / -user 101 -exec chown 999 {} +;
}

##############################################################################
# Main function
##############################################################################

main() {
  # Mount permanent data  (i.e. ossec.conf)
  mount_permanent_data

  # Restore files stored in permanent data that are not permanent  (i.e. internal_options.conf)
  apply_exclusion_data

  # Apply correct permission and ownership
  set_correct_permOwner

  # Rename files stored in permanent data (i.e. queue/ossec)
  move_data_files

  # Remove some files in permanent_data (i.e. .template.db)
  remove_data_files

  # Create wazuh-authd key and cert if not present
  if [ ! -e ${WAZUH_INSTALL_PATH}/etc/sslmanager.key ]
  then
    create_ossec_key_cert
  fi

  # Mount selected files (WAZUH_CONFIG_MOUNT) to container
  mount_files

  # Allow setting custom hostname
  set_custom_hostname

  # Configure ossec.conf based on environment variables
  function_configure_ossec_conf

  # Delete temporary data folder
  rm -rf ${WAZUH_INSTALL_PATH}/data_tmp

  # Set correct ownership for Wazuh related directories
  configure_permissions
}

main